SWING GATE OPERATOR
Features:Supports gate leafs up to 660b or 12 feet (3.6m) Dual Gate Opener opens 2 leafs 24 feet or 1320lbs Battery Backup for power outages Keypad Interface Single Button Interface Infrared Safety Beam Interface Supports up to 100 Remotes, 2 included. RF Rolling Code, prevents thieves. Auto-Close Feature Solid Steel Lock included Push to Open or Pull to Open Configurable Self Learning Opening / Closing Limit Capability Manual Key Release for Emergencies Self-locking and reversible gear motor Die-cast aluminum and quality painted body Water-proof design Extremely quiet Overheat and over-current protection Adjustable output thrust Built-in micro-switches for gate opening arrest Relay Coil Voltage: DC 12V, SCM power supply: DC 5V Easy installation, full fitting accessories are provided with motor kits Operator can be post mounted inside gate and gate leaf direction can be both inward or outward. Adjustable auto-close child safety obstruction sensitivity and dual gate operable sequence.Power Supply: AC 110V Max. power 735W Electronic Lock: DC 12V 2A Operating Time: 12 seconds ~ 100 seconds Control panel with interface for photocells, loop detector, IC card reader & alarm lamp, and Keypad Weight of Control Box: 4.4. lbs. (2Kg) Time-Delay protection
Swing Gate Openers / Operators
Residential duty swing gate operator, available in 115V supply voltage, 15-18 second gate opening speed. The Model LRA Linear Residential Actuator is designed to open and close a light-duty residential swing gate. The operator can be used in left‑hand or right‑hand swing gate installations on gates weighing up to 600 pounds. Dual gate installations are possible by adding a second LRA2 arm. The operator is connected by a cable to an APeX electronic controller, which provides all connections for input and entrapment detection devices. The Controller is housed in a separate enclosure and contains a built-in radio receiver for wireless activation by remote control transmitters. Brackets attached to the gate and gate hinge post are for mounting the operator and to provide a mechanism to move the gate. When the operator activates, the worm drive in the linear actuator changes the distance between the two brackets that the operator is mounted on. When the operator pulls the two brackets closer together, the gate opens. When the operator pushes the two brackets farther apart, the gate closes